Reliance(RIL)  Placement Paper   General - Other   -31 Jan 2008

Reliance(RIL)  Placement Paper   General - Other   -31 Jan 2008

  • Posted by  FreshersWorld 
    7 Jan, 2012


    1)which of the following is mass flow meter?
    a.turbine 2.micromotion flowmeter3.magnetic
    2)cobalt 60 has a half life period of?
    3)tc timelag_________if thermowell is added
    4)for a pr tx with sensitivity,and range given for water, what it is for a liquid with another density.
    5)which of the following cant b detected using gas chromatograph. c2h6,ch4,none,co2
    6)which of the following is not used as a carrier gas n2,helium ,o2,co2
    7)the best control for temperature.
    a.Pi b.P c.PId d.PD
    8)j type thermocouple is of: iron constantan, copper constantan, etc
    9)magnetic flowmeter works on which principle:
    10)for magnetic meters ,E=?
    a. bv/d b. bvl/d c. none
    11)leakage vi is not possible for 
    12)the need of emergency shut down?
    13)pirani gauges are used for
    14)the bourdon tubes should not face 
    a. creep b. hysterisis c. fatigue d. all
    15)if 0-500mm of hg is calibrated as 4-20 ma, then wat is o/p for 125mm
    16)smps does not have
    17)in a ph electrode, the signal conditioning is provided by bjt,fet,etc
    18)cavitation is caused by
    19)ieee 802.5 obeys ethernet protocol,ip,fddi,token ring,none
    20)veena contracta point is characterised by:
    21)the amplifier gain is a,then the f/b gain,for a positive f/b system in an oscillator is:
    22)the stable system should have which kind of feedback?
    23)THE DAMPER UNIT is used for:
    24)the beta ratio is=;
    25)the input to a binary adder is 110,what is sum ,carry?
    26)the 4 2bit binaryu counter has the modulus:

    there were some mind crazy qtns on mental was simple....check them out...!!!!!!!!!!!
    All the every best.......

2009-2016 All rights reserved.