Honeywell  Placement Paper   Whole Testpaper   Hyderabad-16 Mar 2008

Honeywell  Placement Paper   Whole Testpaper   Hyderabad-16 Mar 2008


  • Posted by  FreshersWorld 
    7 Jan, 2012

    HONEYWELL PAPER ON 17TH MARCH AT HYDERABAD

    Hi every one, My name is Sarath completed B.Tech.(CSE) .I have attended the Honeywell  at Honeywell campus in Bangalore on 23rd aug 2008.  But I cleared only two rounds and I lost in technical round.


    The pattern is as follows:
    1) Written Test-1(objective- technical)
    2) Written Test-2(Descriptive- aptitude+technical)
    3) Technical Interview-1
    4) Technical Interview-2
    5) HR Interview

    1)Written Test (objective)
    There are two different question papers
    1. Electronics stream    2. Computer stream

    I belongs to computer science stream. Again there are two different sets of question papers in each stream. This test consists of 40 technical questions. The duration is 45 min.The questions are mainly from C&DS, OS, DBMS, NETWORKS, MICRO PROCESSORRS,

    Some of the questions are:
    1. Open addressing and chaining are the methods used for
    a) sorting   b) searching  c) conflict- resolution d) none

    2. Arrange the following in the increasing order of space complexity
    a) Merge sort, quick sort, heap sort    b) quick sort, merge sort, heap sort
    c) heap sort, quick sort, merge sort     d)

    3. Given a tree and asked the preorder traversal

    4. Given a graph and asked the BFS for it

    5. If a table is in 3NF, it is also in
    a) 2NF  b) BCNF  c) both   d) none

    6. definition of view

    7. In DBMS data is recovered from a crash immediately by using
    a) storing one copy in another disc b) catalog  c) checkpointing  d)

    8. one more question on normal forms i.e., about transitive dependencies

    9.  which is the first general purpose microprocessor developed by Intel
    a) 4004   b) 8080  c) 2002  d)

    10. which of the following flag is not set for JUMP instruction
    a) carry flag  b) auxillary carry flag c) zero flag  d) parity flag

    11.Which of the following is an IPV6 address

    12. what is the minimum and maximum size of TCP header
    a) 10 bytes b) 20 ? 60 bytes  c) 20- 50 bytes

    13. If  a number of computers are connected to a central hub then it is called
    a) star topology b) bus topology c) ring topology

    14.  which protocol is used to transfer data using TCP for a serial or parallel port
    a) ppp    b) IPX  c)  TCP with Net BEUI  d)

    15. which of the following is a non preemptive scheduling
    a) FCFS  b) round robin  c) shortest job first  d)

    16. which of the following is not a synchronization tool.
    a) semaphores  b) mutex   c) shared memory d) all

    17. Unix uses _________ scheduling
    a) round robin b) priority scheduling c)           d)      

    18. In which layer the conversion of data structures of the data transferring into the format of host is done in
    a) application layer  b) transport layer   c) presentation layer   d) data link layer

    19. The correct order of  data transfer when transferring data from magnetic disk to System is
    a) magnetic diskà main memoryàcache memoryàregisters
    b) magnetic diskà main memoryàregisters
    c) magnetic diskà main memory/cache memoryàregisters

    20. Given  a binary number which is equivalent to a decimal number including a sign       
    a) 100   b) -100  c) 101  d)-101

    21. which of the following is not true about functions.
    a) functions can call by itself
    b) function may or may not return any value
    c) function should be defined in the same order as they are declared before
    d)

    22. If we declare a const variable as static, then its _________ changes
    a) life   b) scope   c) initial default value     d) storage

    23. What is the o/p
    #define f(x,y)  x=x+y;y=x-y;x=x-y;
    main()
    {
    int  a=10,b=5;
    f(a,b);
    printf(? The values of a and b are, %d, %d?,a,b);
    }
    a) 10 5  b) 5 10 c) 5 5 d) 10 10

    24. main()
    {
    void *ptr;
    int  i=1;
    ptr=&i;
    ptr++;
    }
    a) the size of ptr incremented by 1 byte
    b) the size of ptr incremented by 2 bytes
    c) the size of ptr incremented by 4 bytes
    d) none

    I remember these questions only. Remaining are mainly c programs. Around 350 members attended in main campus . Around 80 cleared this round(computers +electronics)


    2)Written Test-2(Descriptive- aptitude+technical)
    Next round  is again written test consists of 7 aptitude questions and 10 technical questions(all c programs). This test is common for all.

    The aptitude questions are
    1)There are 4 women to cross bridge and Flashlight.One or two women can cross the bridge with the flash light at a time.those have different walking speeds.The pair must walk at the rate of slower pace
    woman1:1 minutes
    woman2:2 minutes
    woman3:5 minutes
    woman4:10 minutes
    Then what is the minimum required time to cross the bridge by all the 4 women without throwing flashlight?       
    Ans) 19 min

    First woman1 and 2 will go to other end in 2 min (at the slower pace of woman2)à 2m

    Woman 1 will come back -à1min

    Woman 1 and 3 will go--à 5min

    Woman 1 will come backà1min

    Woman 1 and 4 will goà10min
    Total=2+1+5+1+10=19

    2)There are cats got together to decide killing the mice of 999919,each cat kills equal no. of mice and each cat kills more no.of mice than cats there were.Then what are the number of cats?                              


    3)the tree grows first day 1/2 of its original size,grows 1/3 of its previous day size, and grows 1/4 and so on. How many days it will take to grow 100 times to the original size of tree?              
    Ans) 150 days              

    4)There is one 40 kg weight stone. How many weights should I break from this 40 kg so that  it can measure any weight between 1kg to 40 kg?     

    5)There is one monkey climbs 3fts and slips down 2fts of a tree in 1 hour. How much time it will take to reach the top of the tree of 20fts height?
    Ans) 18 hours

    6) A ball is released from a height of 100 mts. After falling on the ground it raises to a height of half of the previous height and the process repeats until it comes to rest. What is the total distance traveled by the ball throughout the journey.

    7) Complete the series
    31  62 __ 25  65 __ 19                                         
    Totally (both campuses) around 50 (cs+ec) members cleared this round.                                   

    Technical Questions
    1) Write a C function to search a number in the given list of numbers .donot use printf and scanf.


    2) main()
    {
    int  a=10,b=7,c=15,z;
    z=?;
    printf(?Biggest number is %d?, z);
    }
    Write the expression for z to print the biggest of three numbers using conditional operator.
    Ans)       z=((a>b)&&(a>c)) ? a : (((b>a)&&(b>c))?b:c)


    3) if( condition)

    {

    printf(?Hello?);

    }

    else

    {

    printf(? World?);

    }

    What should be the condition to display the output as ?hello world?.

     

    4) what is the output of the following program

    main()

    {

    int  cnt,i=7;

    cnt/=i;

    printf(?%d?,cnt);

    }

    Remaining questions are on pointers i.e., what is the output of the program


    Technical Interview ? 1

    In this round they mainly concentrate on C and C++.

    The first question is Rate urself in  C . He wrote the algorithm for gcd and asked me to write the program for it.

    What is virtual function.

    What is meant by monolithic operating system

    What printf statement will return

    What is the difference between multiprogramming and multitasking

    Is UNIX multiuser os &  Is windows ?

    What is preprocessing

    Write c program for queue

    Write the layers in OSI model and what is the difference b/w connection oriented and connection less

    Is sending SMS conn. oriented or conn. less?

    And sending mail is conn. oriented or conn. less?

    What is use of ?tail? command in unix

    And ?ps? command

    Water fall model in s/w engg.

    He asked What is a process

    I told program under execution

    He asked what is program

    I told sequence of instructions

    He again asked what is meant by instruction etc. So be strong in technical subjects mainly c and c++.


    Technical Interview -2

    HR

    All The Best

     

2009-2016 downloadmela.com. All rights reserved.